4MP IR VF Dome Network Camera
Camera | ||
---|---|---|
Image Sensor: | 1/1.8″ Progressive Scan CMOS | |
Signal System: | PAL/NTSC | |
Min. Illumination: | Color: 0.002 Lux @ (F1.2, AGC ON), 0 Lux with IR | |
Shutter time: | 1 s to 1/100,000 s | |
Slow shutter: | Yes | |
Lens: | 2.8 to 12 mm | |
Lens Mount: | Integrated | |
Adjustment Range: | Pan: 0° to 355°, tilt: 0° to 75°, rotate: 0° to 355° | |
Day& Night: | IR Cut Filter | |
Wide Dynamic Range: | 140dB | |
Digital noise reduction: | 3D DNR | |
Focus: | Auto, semi-auto, manual |
Compression Standard | ||
---|---|---|
Video Compression: | H.265+/H.265/H.264+/H.264/MJPEG | |
H.264 code profile: | Baseline Profile/Main Profile/High Profile | |
Video bit rate: | 256Kbps~16Mbps | |
Audio Compression: | G.711/G.722.1/G.726/MP2L2/PCM | |
Audio bit rate: | 64Kbps(G.711)/16Kbps(G.722.1)/16Kbps(G.726)/32-192Kbps(MP2L2)/128-768Kbps(PCM) | |
Dual Stream: | Yes | |
Triple Streams: | Yes |
Image | ||
---|---|---|
Max. Image Resolution: | 2560 × 1440 | |
Sub Stream: | 50Hz: 25fps (704 × 576, 640 × 480) 60Hz: 30fps (704 × 480, 640 × 480) | |
Frame Rate: | 50Hz: 25fps (2560 × 1440, 1920 × 1080, 1280 × 720) 60Hz: 30fps (2560 × 1440, 1920 × 1080, 1280 × 720) | |
Third Stream: | 50Hz: 25fps (1920 × 1080, 1280 × 720, 704 × 576, 640 × 480) 60Hz: 30fps (1920 × 1080, 1280 × 720, 704 × 480, 640 × 480) | |
Image Enhancement: | BLC, HLC, Defog, EIS | |
Image Settings: | Rotate mode, saturation, brightness, contrast, sharpness, AGC, and white balance are adjustable by client software or web browser | |
Target Cropping: | Yes | |
BLC: | Support | |
HLC: | Support | |
Smart Defog: | Support | |
EIS: | Support | |
ROI: | Support | |
3D DNR: | Support | |
Picture Overlay: | LOGO picture can be overlaid on video with 128 × 128 24bit bmp format | |
Day/Night Switch: | Day/Night/Auto/Schedule/Triggered by Alarm In |
Network | ||
---|---|---|
Network Storage: | Support microSD/SDHC/SDXC card (256 GB) local storage and NAS (NFS,SMB/CIFS), ANR | |
Alarm Trigger: | Motion detection, video tampering alarm, network disconnected, IP address conflict, illegal login, HDD full, HDD error | |
Protocols: | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour | |
General Function: | One-key reset, anti-flicker, five streams and up to 5 custom streams, heartbeat, password protection, privacy mask, watermark, IP address filter | |
System Compatibility: | ONVIF (PROFILE S, PROFILE G), ISAPI, SDK |
Intelligent | ||
---|---|---|
Face Capture: | Face detection performance: up to 30 faces per frame Detectable face position:͗ supports swing left and right from -65° to 65°, tilt up and down from -45° to 45° | |
Behavior analysis: | Line crossing, intrusion, region entrance, region exiting. Support alarm triggering by specified target types (human and vehicle).Filtering out mistaken alarm caused by target types such as leaf, light, animal, and flag,etc. |
Interface | ||
---|---|---|
Communication Interface: | 1 RJ45 10M/100M/1000M Ethernet port 1 RS-485 interface (half duplex, HIKVISION, Pelco-P, Pelco-D, self-adaptive) | |
Audio: | 1-ch 3.5 mm input (line in), 1-ch 3.5mm output, mono | |
Alarm: | 1-ch input, 1-ch output (up to 12 VDC 1A or 10 VAC 500 mA) | |
Alarm Input: | 1 | |
Alarm Output: | 1 | |
Video Output: | 1Vp-p composite output (75 Ω/CVBS) | |
On-board storage: | Built-in micro SD/SDHC/SDXC slot, up to 256 GB | |
Reset Button: | Yes |
Audio | ||
---|---|---|
Environment Noise Filtering: | Support | |
Audio I/O: | support | |
Audio Sampling Rate: | 8 kHz/16 kHz/32 kHz/44.1 kHZ/48 kHz |
Smart Feature-set | ||
---|---|---|
Behavior Analysis: | Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal | |
Line Crossing Detection: | Cross a pre-defined virtual line | |
Intrusion Detection: | Enter and loiter in a pre-defined virtual region | |
Region Entrance: | Enter a pre-defined virtual region from the outside place | |
Region Exiting: | Exit from a pre-defined virtual region | |
Unattended Baggage: | Objects left over in the pre-defined region such as the baggage, purse, dangerous materials | |
Object Removal: | Objects removed from the pre-defined region, such as the exhibits on display. | |
Exception Detections: | Scene change detection, defocus detection | |
Detection/Recognition: | Face Detection | |
Statistics: | Object Counting (Entrance and Exit object number is accounted and showed on screen in real time) |
General | ||
---|---|---|
IR Range: | Up to 30m | |
Operation Condition: | -30 °C to 60 °C (-22 °F to 140 °F), humidity 95% or less (non-condensing) | |
Power Supply: | 12 V DC ± 20%, PoE (802.3af, class 3) | |
Power Consumption: | With extra load: 12 VDC, 1.0 A, max. 12.9 W; PoE (802.3af, 36 V to 57 V), 0.2 A to 0.4 A, class 3 Without extra load: 12 VDC, 0.8 A, max. 12.5 W; PoE (802.3af, 36 V to 57 V), 0.2 A to 0.3A, class 3 “with extra load” means that an extra device is connected to and powered by the camera. | |
Impact Protection: | IK10 | |
Dimensions: | Camera: Φ140.5 × 122.6 mm (Φ5.5″ × 4.8″) With package: 244 × 174 × 173 mm (9.6″ × 6.9″ × 6.8″) | |
Weight: | Camera: approx. 950 g (2.09 lb.) With Package: approx. 1300 g (2.87 lb.) |
02-942-3868-72